Smart CAT5-XT-1100 CAT 5 USB Extender
Smart CAT5-XT-1100 CAT 5 USB Extender is used for the Smart Board SB885IX3, SB880IX3, SB885E, SBX885, SB880E, SBX880, SBM685IX3, SBM680IX3, SBM680VIV2, SBM685E, SBM685, SBM680E, SBM680, SBM685V, SBM680V whiteboards. Smart brand supplies works best for your Smart whiteboards and make using Smart USB extenders make them last longer.
Smart CAT5-XT-1100 CAT 5 USB Extender
-
| Model: CAT5-XT-1100 |
| Description | CAT 5 USB extender |
| Size (one extender) | 13" L × 1 5/8" W × 7/8" D (33 cm × 4 cm × 2.3 cm) |
| Weight | 3 3/8 oz. (95 g) |
| Shipping size | 5" L × 5" W × 2 3/8" D (12.7 cm × 12.7 cm × 6 cm) |
| Shipping weight | 6 oz. (170 g) |
| Maximum extension | Up to 130' (40 m) |
| USB device support | Full-speed (12 Mbps) USB 1.1 device |
| USB hub support | Can support up to two externally powered USB hubs connected in series with the Cat 5 USB extender. Each hub reduces the maximum extension by 40' (12 m). |
| Maximum power output | 175 mA when the LEX is supplied with 500 mA (USB bus powered) |
| Required cable | You must supply a Cat 5, Cat 5e or Cat 6 cable (Cat 5e ScTP ground-shielded cable is recommended) to connect the REX and the LEX. It must not exceed 130' (40 m), but may be less depending on the number of hubs connected. Use plenum rated cable if required. |
| LEX (local) | One USB-A plug, one RJ45 jack |
| REX (remote) | One USB-B plug, one RJ45 jack |
| Operating temperature | 32°F to 122°F (0°C to 50°C) |
| Environmental compliance | China EIP, EU RoHS and WEEE |
| Regulatory certifications | CE and FCC |
There are no reviews for this item.
Write a Review
; "Smart CAT5-XT-1100 CAT 5 USB Extender")
