| Model: KAPP-IQ65 |
| Display |
| Aspect ratio | 16:09 |
| Optimal resolution | 3840 × 2160 at 30 Hz (HDMI® input only) |
| Horizontal frequency | 244–280 kHz (analog and digital) |
| Vertical frequency | 24–120 Hz |
| Contrast ratio (typical) | 1400:01:00 |
| Brightness (typical) | 280–360 cd/m² |
| Pixel pitch | 0.372 mm |
| Gamut | 72% of NTSC |
| Viewing angle | 178° |
| Response time | 8 ms |
| Simultaneous users | Dual user |
| Size | 38 1/2" x 59 3/8" x 4 3/4"
65" diagonal |
| Weight | 138 lbs (62.4 kg) |
| Shipping dimensions (including pallet) | 69 1/4" × 49 5/8" × 11 7/8" (175.8 cm × 126.1 cm × 30.3 cm) |
| Shipping weight | 182 lbs (82.4 kg) |
| Digital capture technology | DViT® (Digital Vision Touch) technology |
| Wireless technology | Bluetooth 4.0 dual mode (backwards compatible with Bluetooth 2.1 + EDR) |
| Capture options | Establish a Bluetooth wireless connection with a supported mobile device (see below) by scanning the capture board’s unique QR code |
| Presence detection | Presence detection sensor on the bottom frame |
| Audio | Two 10 W integrated side-firing speakers |
| Noise level | 35 dBA |
| Included cables and hardware | 8' (2.4 m) country-specific power cable
AM30 appliance
Pen (×2) |
| Mounting holes | For a standard VESA® 400 mm × 400 mm mounting plate
13 3/4" (34.9 cm) from the bottom of the interactive flat panel |
| Mounting bracket depth | Minimum depth of 1 5/8" (4.2 cm) for all components on the back of the interactive flat panel to clear the wall |
| Connectors |
| Side | Connector panel:
USB 2.0 Type-B
HDMI 1.4 in
Stereo 3.5 mm out
RS-232 in
AM30 appliance:
USB 3.0 Type-A (×2)
USB 2.0 Type-B (×2) |
| Bottom | USB 2.0 Type-A |
| Back | AC power inlet |
| SMART kapp app |
| Apple devices | iOS 7.1 or later operating system software
50 MB storage
iPhone 4S or later
Third generation iPad or later
First generation iPad mini or later
Fifth generation iPod touch or later |
| Android™ devices | Android 4.4.4 (KitKat) or later operating system
50 MB of storage (internal or SD card)
1024 MB of RAM
720p or better screen resolution
Bluetooth 2.1 + EDR
3 megapixel or better rear-facing camera (recommended) |
| SMART kapp viewer |
| Mobile | Safari for iOS 7.1 or later operating system software
Chrome™ for Android 39.0.2171.93 or later |
| Desktop | Internet Explorer® 10 or later
Chrome 39.0.2171.95 or later
Firefox® 34.0.5 or later
Safari 8.0 or later |
| Storage and operating requirements |
| Power requirements | 100V to 240V AC, 50 Hz to 60 Hz |
| Power consumption at 77°F (25°C) | Standby mode 48 W
Normal operating 187 W
Maximum operating 199 W |
| Operating temperature | 41–95°F (5–35°C) |
| Storage temperature | -4–140°F (-20–60°C) |
| Humidity | 5–80% relative humidity, non-condensing |
| Certification and compliance |
| Regulatory certification | UL (U.S./Canada), FCC, IC, CE Mark, RCM Mark |
| Environmental compliance | European Union RoHS, Packaging, WEEE and REACH
U.S. Packaging and Conflict Minerals |
; "SMART KAPP-IQ65 Capture Interactive Whiteboard")
